Training

          Below is a list of scheduled training courses for 2015. These courses are directed at end users and distributors – the target audience and pre requisites are shown in the table below. Courses are normally for a maximum of 8 delegates per course.

In addition to our scheduled courses, Hartridge would also be pleased to quote separately for any individual training requirements you may have, whether at Hartridge or onsite, for individuals or groups. Please enquire at [email protected]

PDF Click here to download training schedule
PDF download a booking form for our training courses
Adobe Reader The above files need Adobe Reader -click here to get this free from Adobe.com

 

Courses 2015
Booking CodeDateDescriptionTarget Audience & Pre-requisitesDuration
TRG 9th to 13th February 2015 AVM2-PC Training
Services required, software & bench overview, operation, maintenance, basic fault finding (metering audits), spares, replacing basic parts, writing basic test plans. Introduction into EUI and HB378.
Workshops and Distributors
Hartridge Test Bench experience
4.5 days
TRO 16th to 17th February 2015 CRi-PC Course 1
Services required, software & bench overview, operation, maintenance, basic fault finding (incl running Crib files & audits), spares, replacing basic parts, writing basic test plansFor distributors: an additional 1 day of installation & commissioning training can be added to this course
Workshops and Distributors
Hartridge Test Bench experience
2 days
TRD 23rd to 27th February 2015 CRi-PC Course 2
Auditing, C3i, piezo CR inj, installation & commissioning, user training, fault finding for distributors (incl routers, software & remote support), HM1016 & Drucks, replacing parts
Distributors
CRi-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region
4.5 days
TRM 16th to 20th March 2015 AVM2-PC Diagnostic
Recap from AVM2-PC training. In depth diagnostic procedures and fault tree use. By the end of the course you will be able to plan and better structure your diagnostic skills.
Distributors
AVM2-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region.
4.5 days
TR2 23rd March 2015 UK/IRE Workshop Technician Training
Training for Users of Hartridge equipment in UK/IRE Workshops. AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding (CRp-PC & IFR-50 can also be included if required)
workshop Technicians
Test Bench Experience
1 day
TR2 24th March 2015 UK/IRE Workshop Technician Training
Training for Users of Hartridge equipment in UK/IRE Workshops. AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding (CRp-PC & IFR-50 can also be included if required)
Workshop Technicians
Test Bench Experience
1 day
TR3 20th to 24th April 2015 AVM2-PC E3 EUI and Common Rail
Hartridge HK1500 cam box including E3 upgrade, auditing, installation & commissioning, training operators, test plans, fault finding and parts replacement, Review of HK870, Common Rail pump (APC, DAQ400, HB389) & CR injector testing.
Distributors
CRi-PC & AVM2-PC Course 1 & 2 must have been completed and participants certified by Hartridge at this level. Technicians must able to read wiring diagrams, use a multi meter and have the recommended calibrated tools & equipment to support Hartridge equipment in their region
4.5 days
TR0 6th & 7th May 2015 CRi-PC Course 1
Services required, software & bench overview, operation, maintenance, basic fault findings (including running Crib files & audits). spares, replacing basic parts, writing basic test plans.
Workshops and Distributors
Hartridge Test Bench Experience
2 days
TRG 11th to 15th May 2015 AVM2-PC Training
Services required, software & bench overview, operation, maintenance, basic fault finding (metering audits), spares, replacing basic parts, writing basic test plans. Introduction into EUI and HB378.
Workshops and Distributors
Hartridge Test Bench experience
4.5 days
TRD 18th to 22nd May 2015 CRi-PC Course 2
Auditing, C3i, Piezo CR injector, installation adn commissionning, user training, fault finding for distributors (including routers, software & remote support), HM1016 & Druck, replacing parts.
Distributors
CRi-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region
4.5 days
TRM 1st to 5th June 2015 AVM2-PC Diagnostic
Recap from AVM2-PC Training. In depth diagnostic procedures and fault tree use. By the end of the course, you will be able to plan and better structure your diagnostic skills.
Distributors
AVM2-PC Courses 1  must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region
4.5 days
TR2 8th June 2015 UK/IRE Workshop Technician Training
Training for Users of Hartridge equipment in UK/IRE Workshops AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding (CRp-PC & IFR-50 can also be included if required)
Workshop Technicians
Test Bench Experience
1 day
TRJ 10th to 11th June 2015 AVM2-PC E3 EUI
Hartridge HK1500 cambox including E3. Upgrade, auditing, installation & commissioning, training operators, test plans, fault finding and parts replacement. Review of HK870.
Distributors
AVM2-PC Courses 1 & 2 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and hve the recommended calibrated tools to support Hartridge equipment in their region
2 days
TR6 15th to 18th June 2015 New Technologies and Recertification
Refresher training and new technologies, key learnings, fault trees, modification, “what’s new”, group discussions
Distributors
CRi-PC & AVM2-PC Course 2 must have been completed and participants certified by Hartridge at this level.
4 Days
TR5 22nd to 25th June 2015 Service, Calibration & Auditing
AVM2-PC (incl Common Rail & amp; E3), CRi-PC (incl C3i & Piezo), CRp-PC, IFR-50, IFT-70, HH701 & HH705. Service, calibration and auditing, results, certificates, maintenance, audit tools (Drucks, HM1016, multimeter) & basic fault finding and parts replacement.
Distributors
CRi-PC  / AVM2-PC / CRp-PC Course 2 must have been completed and participants certified by Hartridge at this level.Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region.
4 Days
TR2 30th June 2015 UK/IRE Workshop Technician Training
Training for users of Hartridge equipment in UK/IRE workshops – AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding. (CRp-PC & IFR-50 can also be included if required).
Workshop Technicians
Test Bench Experience
1 day
TR6 13th to 16th July 2015 New Technology and Recertification
Refresher training and new technologies, key learnings, fault trees, modifications, “what’s new”, group discussions
Distributors
CRi-PC and AVM2-PC Course 2 must have been completed and participants certified by Hartridge at this level.
4 Days
TR2 10th August 2015 UK/IRE Workshop Technician Training
Training for users of Hartridge equipment in UK/IRE workshops. AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding(CRp-PC & IFR-50 can also be included if required)
Workshop Technicians
Test bench experience
1 day
TRG 7th to 11th September 2015 AVM2-PC Training
Services required, software & bench overview, operation, Maintenance, basic fault finding (metering audits), spares, replacing basic parts, writing basic test plans
Workshops and Distributors
Hartridge Test Bench experience
4.5 days
TRO 14th to 15th September 2015 CRi-PC Course 1
Services required, software & bench overview, operation, maintenance, basic fault finding (incl running Crib files & audits), spares, replacing basic parts, writing basic test plans
Distributors: An additional 1 day of installation & commissioning training can be added to this course
Workshops & Distributors
Hartridge Test Bench Experience
2 Days
TRM 21st to 25th September 2015 AVM2-PC Diagnostic
Recap from AVM2-PC Training. In depth diagnostic procedures and fault tree use. By the end of the course, you will be able to plan and better structure your diagnostic skills
Distributors
AVM2-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region.
4.5 Days
TRD 28th September to2nd October 2015 CRi-PC Course 2
Auditing, C3i, Piezo CR injector, installation & commissioning, user training, fault finding for distributors (incl routers, software & remote support), HM1016 and Drucks, replacing parts.
Distributors
CRi-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region.
4.5 day
TR4 5th to 9th October 2015 AVM2-PC course 3 – Common Rail
Common Rail Pump (APC, DAQ400, HB389) & CR Injector testing. Auditing, installation & user training, fault finding, Crib files, filter checks, basic test plans, use of HM1016, Drucks, spares, replacing parts.
Distributors
AVM2-PC Course 2 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region.
4.5 days
TR5 12th to 15th October 2015 Service, Calibration and Auditing
AVM2-PC (incl Common Rail & E3), CRi-PC (incl C3i & Piezo), CRp-PC, IFR-50, IFT-70, HH701 & HH705. Service, calibration and auditing, results, certificates, maintenance, audit tools (Drucks, HM1016, multimeter) & basic fault finding and parts replacement
Distributors
CRi-PC/ AVM2-PC/ CRp-PC Course 2 must have been completed and participants certified by Hartridge at this level.  Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to
support Hartridge equipment in their region
4 days
TRG 19th to 23rd October 2015 AVM2-PC Training
Services required, software & bench overview, operation, Maintenance, basic fault finding (metering audits), spares, replacing basic parts, writing basic test plans
Distributors
Hartridge Test Bench experience
4.5 days
TRO 26th to 27th October 2015 CRi-PC course 1
Services required, software & bench overview, operation, maintenance, basic fault finding (incl running Crib files & audits), spares, replacing basic parts, writing basic test plans
For distributors, an additional day of installation & commissioning training can be added to this course
.
Workshops &Distributors
Hartridge Test Bench Experience.
2 days
TRM 2nd to 6th November 2015 AVM2-PC Diagnosis
Recap from AVM2-PC training. In depth diagnostic procedures and fault tree use. By the end of the course, you will be able to plan and better structure your diagnostic skills.
Distributors
AVM2-PC Course 1 must have been completed and participants certified by Hartridge at this level.Technicians must be able to read wiring diagrams, use a multimeter and have the recommended calibrated tools & equipment to demonstrate & support Hartridge equipment in their region.
4.5 days
TRD 9th to 13th November 2015 CRi-PC Course 2
Auditing, C3i, Piezo CR Inj, installation & commissioning, user training, fault finding for distributors (incl routers, software & remote support), HM1016 & Drucks, replacing parts
Distributors
CRi-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region.
4.5 days
TR2 17th November 2015 UK/IRE Workshop Technician Training
Training for users of Hartridge equipment in UK/IRE workshops. AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding (CRp-PC & IFR-50 can also be included if required)
Workshop Technicians
Test bench Experience
1 day
  • Courses include lunches and refreshment on course day and pickup/return between the Hartridge factory and the local hotel
  • Courses will be provided in English language. For other languages please contact [email protected]
  • Hartridge Ltd can assist with booking local hotels and arranging taxi transfers to/from hotel and airport. Any cost would be subject to a 5% administration charge. A list of local hotels and recommended taxi company can be sent upon request or click on the “visit us” page for hotel and taxi information.
  • If you have any special needs (physical or dietary requirements) please advice at the time of booking.
  • Hartridge Ltd. reserves the option to cancel the course with a minimum of 14 calendar working days notice.