Training
- Below is a list of scheduled training courses for 2015. These courses are directed at end users and distributors – the target audience and pre requisites are shown in the table below. Courses are normally for a maximum of 8 delegates per course.
In addition to our scheduled courses, Hartridge would also be pleased to quote separately for any individual training requirements you may have, whether at Hartridge or onsite, for individuals or groups. Please enquire at support@hartridge.com
Click here to download training schedule | |
download a booking form for our training courses | |
The above files need Adobe Reader -click here to get this free from Adobe.com |
Courses 2015
Booking Code | Date | Description | Target Audience & Pre-requisites | Duration |
---|---|---|---|---|
TRG | 9th to 13th February 2015 | AVM2-PC Training Services required, software & bench overview, operation, maintenance, basic fault finding (metering audits), spares, replacing basic parts, writing basic test plans. Introduction into EUI and HB378. |
Workshops and Distributors Hartridge Test Bench experience |
4.5 days |
TRO | 16th to 17th February 2015 | CRi-PC Course 1 Services required, software & bench overview, operation, maintenance, basic fault finding (incl running Crib files & audits), spares, replacing basic parts, writing basic test plansFor distributors: an additional 1 day of installation & commissioning training can be added to this course |
Workshops and Distributors Hartridge Test Bench experience |
2 days |
TRD | 23rd to 27th February 2015 | CRi-PC Course 2 Auditing, C3i, piezo CR inj, installation & commissioning, user training, fault finding for distributors (incl routers, software & remote support), HM1016 & Drucks, replacing parts |
Distributors CRi-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region |
4.5 days |
TRM | 16th to 20th March 2015 | AVM2-PC Diagnostic Recap from AVM2-PC training. In depth diagnostic procedures and fault tree use. By the end of the course you will be able to plan and better structure your diagnostic skills. |
Distributors AVM2-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region. |
4.5 days |
TR2 | 23rd March 2015 | UK/IRE Workshop Technician Training Training for Users of Hartridge equipment in UK/IRE Workshops. AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding (CRp-PC & IFR-50 can also be included if required) |
workshop Technicians Test Bench Experience |
1 day |
TR2 | 24th March 2015 | UK/IRE Workshop Technician Training Training for Users of Hartridge equipment in UK/IRE Workshops. AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding (CRp-PC & IFR-50 can also be included if required) |
Workshop Technicians Test Bench Experience |
1 day |
TR3 | 20th to 24th April 2015 | AVM2-PC E3 EUI and Common Rail Hartridge HK1500 cam box including E3 upgrade, auditing, installation & commissioning, training operators, test plans, fault finding and parts replacement, Review of HK870, Common Rail pump (APC, DAQ400, HB389) & CR injector testing. |
Distributors CRi-PC & AVM2-PC Course 1 & 2 must have been completed and participants certified by Hartridge at this level. Technicians must able to read wiring diagrams, use a multi meter and have the recommended calibrated tools & equipment to support Hartridge equipment in their region |
4.5 days |
TR0 | 6th & 7th May 2015 | CRi-PC Course 1 Services required, software & bench overview, operation, maintenance, basic fault findings (including running Crib files & audits). spares, replacing basic parts, writing basic test plans. |
Workshops and Distributors Hartridge Test Bench Experience |
2 days |
TRG | 11th to 15th May 2015 | AVM2-PC Training Services required, software & bench overview, operation, maintenance, basic fault finding (metering audits), spares, replacing basic parts, writing basic test plans. Introduction into EUI and HB378. |
Workshops and Distributors Hartridge Test Bench experience |
4.5 days |
TRD | 18th to 22nd May 2015 | CRi-PC Course 2 Auditing, C3i, Piezo CR injector, installation adn commissionning, user training, fault finding for distributors (including routers, software & remote support), HM1016 & Druck, replacing parts. |
Distributors CRi-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region |
4.5 days |
TRM | 1st to 5th June 2015 | AVM2-PC Diagnostic Recap from AVM2-PC Training. In depth diagnostic procedures and fault tree use. By the end of the course, you will be able to plan and better structure your diagnostic skills. |
Distributors AVM2-PC Courses 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region |
4.5 days |
TR2 | 8th June 2015 | UK/IRE Workshop Technician Training Training for Users of Hartridge equipment in UK/IRE Workshops AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding (CRp-PC & IFR-50 can also be included if required) |
Workshop Technicians Test Bench Experience |
1 day |
TRJ | 10th to 11th June 2015 | AVM2-PC E3 EUI Hartridge HK1500 cambox including E3. Upgrade, auditing, installation & commissioning, training operators, test plans, fault finding and parts replacement. Review of HK870. |
Distributors AVM2-PC Courses 1 & 2 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and hve the recommended calibrated tools to support Hartridge equipment in their region |
2 days |
TR6 | 15th to 18th June 2015 | New Technologies and Recertification Refresher training and new technologies, key learnings, fault trees, modification, “what’s new”, group discussions |
Distributors CRi-PC & AVM2-PC Course 2 must have been completed and participants certified by Hartridge at this level. |
4 Days |
TR5 | 22nd to 25th June 2015 | Service, Calibration & Auditing AVM2-PC (incl Common Rail & amp; E3), CRi-PC (incl C3i & Piezo), CRp-PC, IFR-50, IFT-70, HH701 & HH705. Service, calibration and auditing, results, certificates, maintenance, audit tools (Drucks, HM1016, multimeter) & basic fault finding and parts replacement. |
Distributors CRi-PC / AVM2-PC / CRp-PC Course 2 must have been completed and participants certified by Hartridge at this level.Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region. |
4 Days |
TR2 | 30th June 2015 | UK/IRE Workshop Technician Training Training for users of Hartridge equipment in UK/IRE workshops – AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding. (CRp-PC & IFR-50 can also be included if required). |
Workshop Technicians Test Bench Experience |
1 day |
TR6 | 13th to 16th July 2015 | New Technology and Recertification Refresher training and new technologies, key learnings, fault trees, modifications, “what’s new”, group discussions |
Distributors CRi-PC and AVM2-PC Course 2 must have been completed and participants certified by Hartridge at this level. |
4 Days |
TR2 | 10th August 2015 | UK/IRE Workshop Technician Training Training for users of Hartridge equipment in UK/IRE workshops. AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding(CRp-PC & IFR-50 can also be included if required) |
Workshop Technicians Test bench experience |
1 day |
TRG | 7th to 11th September 2015 | AVM2-PC Training Services required, software & bench overview, operation, Maintenance, basic fault finding (metering audits), spares, replacing basic parts, writing basic test plans |
Workshops and Distributors Hartridge Test Bench experience |
4.5 days |
TRO | 14th to 15th September 2015 | CRi-PC Course 1 Services required, software & bench overview, operation, maintenance, basic fault finding (incl running Crib files & audits), spares, replacing basic parts, writing basic test plans Distributors: An additional 1 day of installation & commissioning training can be added to this course |
Workshops & Distributors Hartridge Test Bench Experience |
2 Days |
TRM | 21st to 25th September 2015 | AVM2-PC Diagnostic Recap from AVM2-PC Training. In depth diagnostic procedures and fault tree use. By the end of the course, you will be able to plan and better structure your diagnostic skills |
Distributors AVM2-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region. |
4.5 Days |
TRD | 28th September to2nd October 2015 | CRi-PC Course 2 Auditing, C3i, Piezo CR injector, installation & commissioning, user training, fault finding for distributors (incl routers, software & remote support), HM1016 and Drucks, replacing parts. |
Distributors CRi-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region. |
4.5 day |
TR4 | 5th to 9th October 2015 | AVM2-PC course 3 – Common Rail Common Rail Pump (APC, DAQ400, HB389) & CR Injector testing. Auditing, installation & user training, fault finding, Crib files, filter checks, basic test plans, use of HM1016, Drucks, spares, replacing parts. |
Distributors AVM2-PC Course 2 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region. |
4.5 days |
TR5 | 12th to 15th October 2015 | Service, Calibration and Auditing AVM2-PC (incl Common Rail & E3), CRi-PC (incl C3i & Piezo), CRp-PC, IFR-50, IFT-70, HH701 & HH705. Service, calibration and auditing, results, certificates, maintenance, audit tools (Drucks, HM1016, multimeter) & basic fault finding and parts replacement |
Distributors CRi-PC/ AVM2-PC/ CRp-PC Course 2 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region |
4 days |
TRG | 19th to 23rd October 2015 | AVM2-PC Training Services required, software & bench overview, operation, Maintenance, basic fault finding (metering audits), spares, replacing basic parts, writing basic test plans |
Distributors Hartridge Test Bench experience |
4.5 days |
TRO | 26th to 27th October 2015 | CRi-PC course 1 Services required, software & bench overview, operation, maintenance, basic fault finding (incl running Crib files & audits), spares, replacing basic parts, writing basic test plans For distributors, an additional day of installation & commissioning training can be added to this course . |
Workshops &Distributors Hartridge Test Bench Experience. |
2 days |
TRM | 2nd to 6th November 2015 | AVM2-PC Diagnosis Recap from AVM2-PC training. In depth diagnostic procedures and fault tree use. By the end of the course, you will be able to plan and better structure your diagnostic skills. |
Distributors AVM2-PC Course 1 must have been completed and participants certified by Hartridge at this level.Technicians must be able to read wiring diagrams, use a multimeter and have the recommended calibrated tools & equipment to demonstrate & support Hartridge equipment in their region. |
4.5 days |
TRD | 9th to 13th November 2015 | CRi-PC Course 2 Auditing, C3i, Piezo CR Inj, installation & commissioning, user training, fault finding for distributors (incl routers, software & remote support), HM1016 & Drucks, replacing parts |
Distributors CRi-PC Course 1 must have been completed and participants certified by Hartridge at this level. Technicians must be able to read wiring diagrams, use a multi meter and have the recommended calibrated tools to support Hartridge equipment in their region. |
4.5 days |
TR2 | 17th November 2015 | UK/IRE Workshop Technician Training Training for users of Hartridge equipment in UK/IRE workshops. AVM2-PC & CRi-PC end user maintenance, basic spares & consumables, audits and basic fault finding (CRp-PC & IFR-50 can also be included if required) |
Workshop Technicians Test bench Experience |
1 day |
- Courses include lunches and refreshment on course day and pickup/return between the Hartridge factory and the local hotel
- Courses will be provided in English language. For other languages please contact support@hartridge.com
- Hartridge Ltd can assist with booking local hotels and arranging taxi transfers to/from hotel and airport. Any cost would be subject to a 5% administration charge. A list of local hotels and recommended taxi company can be sent upon request or click on the “visit us” page for hotel and taxi information.
- If you have any special needs (physical or dietary requirements) please advice at the time of booking.
- Hartridge Ltd. reserves the option to cancel the course with a minimum of 14 calendar working days notice.